Aluminium In Construction
The Guttermaster product and guttering services represents the highest possible standard in the design and manufacture of stylish aluminium guttering, rainwater pipes and fascia soffit systems.
SOFFIT SYSTEMS – ALUMINIUM SOFFIT SYSTEMS
TopHat is a simple brake-pressed profile which can be manufactured in such a wide variety of widths and gauges it is suitable for almost any application. The recessed joints along the two long edges provide a shadow rebate within which fixings can be hidden. This product can also be provided with discreetly located AirFlow fine line ventilation slots to allow sufficient ventilation of the void whilst preventing vermin ingress.
The Guttermaster aluminium range is available Polyester powder coated to outside surfaces in strict accordance with BS6496. Colours available are standard ‘RAL’, ‘BS4800’ or ‘Syntha Pulvin’ reference.
We also offer a wide range of alternative finishes including heritage textured finish, metallic, anodised coating, aswell as made to order special colours and finishes.
TopHat Cassette is similar to TopHat but has the recessed joint on all four sides which allows wider panels to be produced without sagging, whilst retaining the rebated hidden fixings. The range of gauges and widths makes this a very versatile product.
- Standard profile Soffit planks with overlapping joint for concealed fixing. Easily cut to length to give variations in eaves overhang.
- Virtually maintenance free over the life of the building.
- Discreet Airflow ventilation.
- Appropriate gauge aluminium to ensure strength yet lightweight ease of handling.
Soffit planks are available in a range of standard profiles, to run parallel with the fascia. Alternatively they may be cut into short lengths to run at right angles to the fascia.
Soffit planks fit together with an overlapping joint giving concealed fixing and would generally be supported by a timber roof structure but, when required, project specific metal supporting framework and fixing brackets can be designed and manufactured.
Guttermaster devised a slim edge perimeter feature aluminium coping with secondary support, providing the roof edge with bold symmetrical lines around the whole building.
Guttermaster was called on to provide our SnapLok Capping. We supplied a fully welded curved solution which far exceeded the expectations of the architect.
Guttermaster devised a perimeter feature aluminium coping with secondary support, providing the roof edge with bold symmetrical lines around the whole building.
Shawclough Trading Estate
Mon to Thur: 08:00 - 17:30
Fri: 08:00 - 14:00