Aluminium Column Casings
The Guttermaster product and guttering services represents the highest possible standard in the design and manufacture of stylish aluminium guttering, rainwater pipes and fascia soffit systems.
Aluminium Column Casings
Cosmetic finishing of building support structures such as columns and arches is part and parcel of the Guttermaster service.
Our aluminium column casings are available in square, elliptical, oval and traditional round profiles, our column casings can incorporate male/female assembly joints, decorative collars and rings as required.
We aim to make all system information and options available. If you have a requirement which we have not covered then please don’t hesitate to contact our technical department to discuss how we can tailor a solution for your next project.
- Supplied in standard 2.0mm thickness to BS 2997, but is also readily available in 2.5mm and 3.0mm
- Guttermaster systems use only 4015 H12 alloys in compliance with BS requirements (softer commercial grades of alloys can be found in competitive systems).
Where the building design calls for substantial columns to highlight an impressive entrance way or a statement support structure which reflects the local vernacular, custom designed and fabricated casings are available.
All our tests are independently carried out by leading test institutes. Throughout the programme our products are first tested to realistic parameters and current industry standards. Testing often proceeds to the point of destruction in order to see how high we’ve set the bar. The results, whilst pleasing to our design team, also instill confidence in the minds of our customers and end users industry wide.
The Guttermaster aluminium range is available Polyester powder coated to outside surfaces in strict accordance with BS6496. Colours available are standard ‘RAL’, ‘BS4800’ or ‘Syntha Pulvin’ reference.
We also offer a wide range of alternative finishes including heritage textured finish, metallic, anodised coating, aswell as made to order special colours and finishes.
Guttermaster devised a slim edge perimeter feature aluminium coping with secondary support, providing the roof edge with bold symmetrical lines around the whole building.
Guttermaster was called on to provide our SnapLok Capping. We supplied a fully welded curved solution which far exceeded the expectations of the architect.
Guttermaster devised a perimeter feature aluminium coping with secondary support, providing the roof edge with bold symmetrical lines around the whole building.
Shawclough Trading Estate
Mon to Thur: 08:30 - 17:30
Fri: 08:30 - 16:00